Use the batch file attached below to automatically update Optitiex10.ini file. Value : 1 or 0 (default = 0 = Use metric )

Solution 4 : Make sure no external driver is installed.ĭigitizing result isn't scaled correctly (1.6 percent different )Īdd to Optitex10.ini a new parameter this Parameter will define the working unit for the digitizer Solution 3 : If the digitizer mouse is wireless, check the batteries. Solution 2 : Check that the COM port is defined in the windows hardware device. Solution 1 : check that the serial cable is plugged on both computer and digitizer, and the digitizer is turnned on. Solution : Disconnect the digitizer from the power for 3-5 minute then reconnect and try again.

Ifthe key is on, the power light is on if the key is off, the power light is off.Click on the key to toggle the setting, if necessary.įollow the diagram below in order to set up the digitizerĪfter you have completed your setup, save it by clicking on one of the Save keys.Įxit configuration mode by clicking on the Config/Exit key. The power light is on if the bank is active.ĭetermine whether the Configuration keys are on or off by placing the pointing tool over each key. You can determine which bank you are in by placing the pointing tool over one of the Bank keys. Model number: 33110: Part number: 16037-080114: Dimensions overall: 3/4 in x 9 1/2 in Category I/O/pointing/mouse Credit Gift of Don Maslin Lot Number. Turn on configuration mode by clicking on the Config/Exit key.Ĭlick on the Bank key where you need to work (A, B, or C). Date 1989 Manufacturer CALCOMP Identifying Numbers. Digitizer, Tablets and scanners: GTCO CalComp, Inc. Each bank has a different set of tablet options that are availablethrough Configuration key combinations. TechJet 5500 Large Format Inkjet Plotter / Printer Information: CalComp Graphics. Settings up Lectra Caclomp DrawingBoard 6 digitizer to work with Optitex

Select Calcomp 34480 (Lectra) driver in the digitizer setup dialog box and then use the default setting for this driver. Lectra Caclomp (34480) digitizer Settings Ex :34480, is Calcomp Drawboard 3 44X80 inch. Lectra has different OEM Calcomp digitizers, to find your model number look on the back of the digitizer for the silver plate, the number is compose of 5 digits, first one is the Drawboard model, last 4 are the size.

Calcomp tablet